CST BrandsHelpdesk Support JarFull List of Support Jar Commands

Full List of Support Jar Commands

System

“dD” sets the debug level to D.

“dc” clears Syslog.dat and common.comm.

“d?” queries the debug level, last start time and common version.

“dw” displays Weights and Measures information.

Auth

“ab” requests a credit card batch.

“altext” sends 'text' command to the Credit Card Library (CCL).

"az" resets CCL interface debug level.

Proprietary Fleet

"bi" does an immediate batch.

"bpFILENAME" install a new base prf file.

"bqFILENAME" updates the prf file.

"bs" same as "bi"

"bsHH:MM" sets the batch time.

"bw" writes an updated base prf file.

"bwHH:MM" sets the time to write the base file.

"bx" cancels the batch time.

"by" cancels the prf file write time.

"bz" makes a test card.

Payment Terminals

"caDDXX" enters test data  test only.

"cbDDBB" does beep BB on dispenser DD.

"ccX" closes pay at pump if X=1, otherwise opens.

“cfDDX” takes DD offline if X=1, otherwise places online.

"chDD" hard resets Tokheim DPT DD.

"ciDDTEXT" displays immediate TEXT on DD.

"ckDDX" enables keypad on DD to mode X.

"cl" reloads prompts.

“cmTEXT” relays dispenser specific command TEXT.

"cnDDTEXT" prints a test receipt at DD.

"coDD" puts dispenser DD temporarily offline.

"cpDDPP" displays prompt PP on DD.

"cq" outputs CRD statuses.

"crDDX" enables card reader DD if X=1, disables otherwise.

“csDDX” sends command X to security module, e.g. GSM.

“ct” closes all threads but one  test only.

"cuDD" outputs status of DD, Wayne only.

"cvX" enables video is X=1, disables otherwise.

"cx" saves comm dump.

"cy" adds comm dump to common.comm.

"cz" resets port debug level.

Payment Terminals - Gilbarco

“cmDDaX” enable cash acceptor DD if X=1, disable otherwise.

“cmDDc” report acceptor DD configuration data.

“cmDDe” request last event for acceptor DD.

“cmDDl” report debit status for DD.

“cmDDy” place 2nd DBOX comm dump in common.comm.

“cmDDz” reset 2nd DBOX comm debug level.

Payment Terminals - Smart Fuel

“cmDDc” attempt SFD connect  test only.

“cmDDd” attempt SFD disconnect  test only.

“cmDDmc” report terminal configurations.

“cmDDmX” send test command X  test only.

“cmDDp” parse test XML  test only.

“cmDDr” reset terminal DD.

“cmDDs” XML test  test only.

“cmDDt” print test request  test only.

“cmDDu” report SFT connect status.

“cmDDv” force printer error  test only.

“cmDDy” place SFD comm dump in common.comm.

“cmDDz” reset SFT comm debug level.

Security Module

“csDDs” send GSM CRIND DD start up  test only.

“csDDt” reset GSM.

“csDDu” report connect status.

"csDDx" saves comm dump.

"csDDy" adds comm dump to common.comm.

"csDDz" resets port debug level.

Gas

"gbDD" toggles the block state for DD.

"gdDD" will deauthorize DD.

"ge" load prices.

"giDD" displays pump info for DD.

"giDD1" displays stacked pump info for DD.

"glDDL" sets DD price level to L.

"gm" puts meters info in file supmeter.

"gp" displays the pump statuses.

"gqDD" clears prepay status for DD.

"gsDD1" stops dispenser DD.

"gsDD0" restarts dispenser DD.

"gtDDT" sets DD tier to T.

"guDD" provides Wayne diagnostic information, see Decade 2400 mode 30.

“gwDDo” toggles Warren-Rogers interface status.

“gwDDTEXT” sends command TEXT to Warren-Rogers interface.

"gx" saves commdump for primary and secondary port.

"gy" adds comm dumps to common.comm.

"gz" resets port debug levels.

TLS Meters

“ma” report alarms.

“mr” read meters.

“mu” report status

"mx" saves commdump.

"my" adds comm dump to common.comm.

"mz" resets port debug level.

Warren-Rogers

“c” connect status.

"dx" saves commdump.

"dy" adds comm dump to common.comm.

"dz" resets port debug level.

POS

"pe" sends “Hello world” to the master POS.

"peTEXT" sends TEXT to the master POS.

“pl” prepares zipped Syslog.dat.

"pm" closes the support connection.

“poDD” disconnects TCP/IP POS DD.

"pp" reports the status of the first 10 POSs.

"ppN" reports the status of 10 POSs starting with POS N.

"pr" resets the support modem.

"pxm" saves comm dump of modem port.

"pxs" saves comm dump of satellite port.

"pxN" saves comm dump of POS N com port.

“px1” saves comm dump for all TCP/IP POSs.

"pym" adds comm dump of modem port to common.comm.

"pys" adds comm dump of satellite port.

"pyN" adds comm dump of POS N.

“px1” adds comm dump for all TCP/IP POSs.

"pzm" resets modem port debug level.

"pzs" resets satellite port debug level.

"pzN" resets POS N com port debug level.

“pz1” resets TCP/IP debug level.

Car Wash

"wcLD" gets code for level L and discount D.

"wi" gets Ryko ID.

"wr" resets poll.

"ws" displays status.

"wu" uses last code.

"wuDDDDD" uses code DDDDD.

"wx" saves commdump.

"wy" adds comm dump to common.comm.

"wz" resets port debug level.

0 Comments

Add your comment

E-Mail me when someone replies to this comment