CST BrandsHelpdesk Fuel SetupSite Controller Setup for Bennett Pumps

Site Controller Setup for Bennett Pumps

Before Running the Gas Setup Program

(1) The Baud Rate of the Gas Pump 2400 and the Crinds 9600.

(2) The Blend Ratio that is setup in the pump.

This information should be verified from the customers pump supplier.

In the Gas Setup Program Setup the  “System Parameters” Section

In the Gas Setup Program Setup the  “System Parameters” Section

Set the Baud Rate for both the Gas and Crinds in this section.

If you are setting up more than one type of dispenser and only 1 gas type has card readers, then setup the gas type of the one with card readers to Gas 1.

When setting up Crinds, the COM port for the Crinds should come before the dispenser port. This means if the Crind Port is set to COM3 the Gas Port should be set to COM4.

Wayne Products should be setup as follows

Wayne Products should be setup as follows

The blends in this setup must match the blend setup in the pumps themselves.

Products

Product 1: UNLEADED REGULAR U 100

Product 2: UNLEADED PLUS S 60

Product 3: UNLEADED PREMUIM P 0

Product 4: DIESEL D 0

The Dispenser Setup is shown below

Dispenser Setup

3 Product Dispenser

Hose 1 = 1st Product on left side of Dispenser

Hose 2 = 2nd Product on left side of Dispenser

Hose 3 = NONE

Hose 4 = 3rd Product on left side of Dispenser

4 Product Dispenser

Hose 1 = 1st Product on left side of Dispenser

Hose 2 = 2nd Product on left side of Dispenser

Hose 3 = 3rd Product on left side of Dispenser

Hose 4 = 4th Product on left side of Dispenser

For all Bennett pumps

Tier: 2

Level : 1

If Smart Fuel Terminal (SMF) -

Set Alpha to Yes

Set Credit to SMF

The Misc Setup is the same for most Dispenser types. It is important to check the following

The Misc Setup is the same for most Dispenser types. It is important to check the following

The “Auth Limit” must have an amount in it or credit cards will not process at the pumps.

Additional Information

Additional Information

Card readers wired in terminal strips ( white box, looks like 515 box, Bennett Model # 115766)

0 Comments

Add your comment

E-Mail me when someone replies to this comment