CST BrandsHelpdesk SetupValero and Valero Fleet Cards

Valero and Valero Fleet Cards

CCL Environmental Variables

CCL Environmental Variables

//Navigate to the CCL Directory

cd /home/ccl/ccl

//Read the envirnon.dat file

nano environ.dat

//The OUTSIDE_CARDS variables requires , 4, 5

OUTSIDE_CARDS    vADjGMpmVWYZ,4, 5

//AVS_INSDIE prompts for zip code on Valero Cards

AVS_INSIDE 5

Ciso.cfg

Ciso.cfg

//Navigate to the CCL Directory

cd /home/ccl/ccl

//Read the ciso.cfg file

nano ciso.cfg

//These entries are required in the ciso.cfg in order for the system to recognize the card type. They must be in numerical order.

4, 3062           ,VALERO FLEET

5, 7000380    ,VALERO

4, 700038      ,VALERO FLEET

5, 7071011    ,VALERO

Tender Media Setup

Tender Media Setup

Make sure Valero is added to Tender Media Setup on the MWS. This is saved to the mstend file. This must be sent down to all registers.

Tendassign.dat

Tendassign.dat

//Navigate to the Fiscal folder on each POS

cd /cygdrive/c/Program Files/Fiscal

//Read the tendassign.dat file

nano tendassign.dat

Each line in the tendassign.dat links prefix ranges with card type. In this example,  the tender number for Valero is 16 (This is found on the MWS tender setup); therefore, line 16 must contain the prefix range for valero cards.

There can only be 32 “vertical” lines in the tendassign.dat file. Make sure there are no blank spaces or any other characters on any lines below the 32nd entry.

Prefix Ranges

VALERO FLEET - Prefix Range - 306200-306299 - Card ID - -4

VALERO FLEET - Prefix Range - 700038 - Card ID - -4

VALERO - Prefix Range - 707101 - Card ID - -4

Editauth

Editauth

//Navigate to the CCL Directory

cd /home/ccl/ccl

//Open the editauth utility

editauth

//Add , 4, 5 as a card type under the correct processor.

2:ANDMmVvWYGZF$,4,5<enter>

//Save changes

S<enter>

0 Comments

Add your comment

E-Mail me when someone replies to this comment