POS Parameters

POS Setup

POS Setup

Click on the "POS Setup" icon on the desktop.

Setup Utility

Setup Utility

The Travstar1 Setup Utility will open. Click on the "Parameters" button.

Register Information

Register Information

1. This is where you set the store number and register number on the POS.  The Store # should be 4 digits. The Register # should be 2 digits. The Host ID Code should be a 4 digit number. The Host ID Code should also be the same as the Register #.

2. This is where the COM ports for Register Devices are entered. These should match what port the device is plugged into on the back of the POS.

Host Information

Host Information

1. Make sure that the bullet Stock File on Host is selected.

2. This is the IP Address of the MWS.

0 Comments

Add your comment

E-Mail me when someone replies to this comment