Bennett/Wayne Dual OEMV Setup

/home/sitecon/sc/environ.dat variables

• EMV_ENABLED 1
• CRDBCX_SSLPORT 9700
• BNTCRD C
• TLS_VERSION 1.2
• EMV_PREAUTH_AMOUNT 7500
• CRDBCX_RELABEL_CREDIT_DEBIT 1
• CRDWIX_RELABEL_CREDIT_DEBIT 1
• PIN_BYPASS_WIX 1
• BUFFER_WIX_MSG 1
• AMEX_APP_SCHEME 1
• GLOBAL_PIN_BYPASS 1
• CRDWIX_DENY_PIN_BYPASS_DEBIT 1
• CRDBCX_MINIMUM_RECEIPT_LINES {x} # Requires SC151 or higher, optional variable

- Where {x} indicates the minimum number of lines the total receipt should contain

- Setting {x} to 1 will force the receipt to be as short as possible

***After adding all SC variables, run exit2 on SC***

/home/ccl/ccl/environ.dat variables

• EMV_ENABLED 1
• PDL ### # ADS, ATL or RBS

***RBS specific variable***

• PARAM_DATA 1

***ADS specific variables***

• ADS_EMVPDL_DEVICEID ###

If site is attended, set to Master POS number + 200. If site is unattended, set to 001

• ADS_EMV_AID_LIST A0000000031010,A0000000032010,A0000000033010,

A0000000041010,A0000000042203,A0000000043060,A00000002501,

A0000000980840,A0000001523010,A0000001524010,A0000003241010

***After adding all CCL variables, run exit2 on ccl and run pdl command on ccl***

CODE VERSIONS

SC Code: 11.01.01-0149_SCEMV_Beta or higher

CCL Code: 11.01.01-3613_EMV_Beta or higher

Make sure “Crind Port:” is defined

Set “Debit:” to No on all dispensers

Wayne Files

Create a new file called “CrdWixIPAddr.dat” with 640 permissions and sitecon:users ownership. Add all the Wayne CAT IP addresses to the file.

192.168.1.114:1234

192.168.1.115:1234

…etc

Note: Single-board/Duel side configurations will only have one IP shared between both sides

A PDL xml ($EMVPDL-CrdWix.xml) can be found on SharePoint under ‘CODE > Wayne Files’.

Place in /home/sitecon/sc

Confirm file ownership/permissions

***Leave filename as is***

Wayne software version required is 2.8.205.9

Bennett Files

A PDL xml ($EMVPDL-CrdBcx.xml) can be found on SharePoint under ‘CODE > Bennett Files’. Place in /home/sitecon/sc and rename to $EMVPDL.xml

Place the files CrdBcxSSL.crt and CrdBcxSSL.enckey in /home/sitecon/sc

Confirm files ownership/permissions of all 3 files

Bennett card reader firmware version: 1000004854-C{x}-PCI
Bennett software version required is 10.10.08 or higher

Prompt 1 in prompts.crd MUST HAVE the word “welcome” in it. Doesn’t matter where and isn’t case sensitive.

Tech installing Bennett dispensers will need the IP of the Fiscal site controller. Tech will need to make sure it’s entered in Managers Mode 26 along with Server IP port 9700

Server IP Port will always be 9700

***The IP address shown is for illustration purposes only***

/home/sitecon/sc

Create file CrdTypes.dat in /home/sitecon/sc and confirm ownership to be sitecon:users. List each fueling position on a single line and define the crind interface.

CrdBcx = Bennett

CrdWix = Wayne

Example:

1,CrdBcx

2,CrdBcx

3,CrdWix

4,CrdWix

...etc